Table of Contents
Advertisement
Commissioning
7 Sensor configuration
The settings of the sensor parameters are implemented via special configuration pages. These pages are part of the
user interface in the VIBGUARD IIoT.
VIBGUARD IIoT starts the standard startup measurement configuration after the power supply has been switched
on. This configuration is adapted to the specific system during startup.
Enter the following address in the browser:
l
http://<IP-address of the CMS>/maintenance
A login dialog appears.
Enter the login details for user level 3.
l
Access to the configuration pages is only possible for user level 3 (highest level).
The sensor configuration page ('Maintenance') appears after a successful login. Here you can set or adjust the sen-
sors, the measuring ranges of said sensors, and the system-specific data.
Sensor configuration page ('Maintenance')
17
Edition: 10.2018
Advertisement
Table of Contents
