Necessary Settings Before Use; Charging The Battery Pack - JVC GZ-MG130E/EK Instruction Manual

Necessary Settings before Use

MENU
Set Lever
Be sure to confi gure the following three
settings before use.

Charging the Battery Pack

1
Set the power/mode switch to OFF.
Slide while pressing down the lock button.
Required charging / recording time (approx.)
The values within ( ) are the times when the LED light is on.
Battery pack
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
12
Access/Charge
Lamp
Power/Mode
Switch
MODE
ON
OFF (CHARGE)
Charging time
1 hr. 30 min.
2 hr. 40 min.
3 hr. 50 min.
2
Attach the battery pack.
Slide the battery pack down until it locks in place.
Bottom of the Camera
3
Connect the AC adapter.
Open the cover.
* If the provided AC adapter is AP-V14E,
connect the power cord to the AC adapter,
and plug the power cord into an AC outlet.
•
the AC adapter using the Everio dock
connector. (
•
The access/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
fi nished. Unplug the AC adapter (or
the power cord) from the AC outlet and
disconnect the AC adapter from the camera.
GZ-MG275/255
1 hr. 15 min.
2 hr. 35 min.
3 hr. 50 min.
DC Connector
To AC Outlet
(110V to 240V)
You can also connect
pg. 6)
Recording time
GZ-MG155 GZ-MG135/130
1 hr. 30 min.
(1 hr. 25 min.)
3 hr. 5 min.
(2 hr. 55 min.)
4 hr. 35 min.
(4 hr. 20 min.)
BATT.
AC Adapter
(ex. AP-V17E)*
1 hr. 35 min.
(1 hr. 30 min.)
3 hr. 15 min.
(3 hr. 5 min.)
4 hr. 55 min.
(4 hr. 35 min.)