s
f
s
d
f
f
10. Fasten the main stand to the left side of the gener-
ator frame as viewed when looking at the control
panel with the bolts and nuts.
d
s Bolt (8 × 16 mm Flange bolt)
d Main stand
f
f Nut (8 mm Flange nut)
Tightening torque:
16 N·m (1.6 kgf·m, 12 lb·ft)
11. Install the wheels into wheel axle frame.
TIP
Make sure the installation direction of the wheels are
correct.
– 16 –