Advertisement
Make cleaning only with flexible thin
and long handle brush attachment
which can be entered from trash rack.
Pull the plug from electric socket for
cleaning and make sure your appli-
ance is cooled.
- Please do not use this appliance with
a timer, a clock, a program key or any
automatic key.
- Please do not use your heater at
bathroom, shower room or swimming
pool.
- If the glass of your heater is broken
or cracked, please do not use the ap-
pliance.
- The protector of this heater aims to
prevent direct access to the heating
elements and it must be at its place
while the heater is in use. The protec-
tive shield cannot provide full protec-
tion for children or the disabled.
- Service life
4 years. Before putting
into operation shelf life is unlimited.
Wall mounting (Picture 2)
Apparatus for wall mounting is in-
cluded in the package with the prod-
uct. Place 4 dowels and wood screw.
There are 2 clips installed behind the
unit for fixing to the wall. These clips
must be fixed plastic thumbscrew on
the product with the same distance as
the distance of wall-mounting. 2
mounting apparatus are included in
the package with the product. These
clips must be attached to other clips
on the product fixed with bolt and nut.
Then the product should be inserted in
suitable points drilled for hanging on
the wall and. The unit must be parallel
with the floor completely at this mo-
ment.
Electrical connection required for wall
mounting (if it is operated without any
cables or cords) must be performed
by authorized service employee.
Please consider the following warnings
for electrical connection required for
wall mounting without any cables or
cords.
Electrical connection
Insert the plug into socket by paying
nect it to the grounded plug for your
own safety. Then adjust the heater
upwards. Find the best angle and
tighten the screws.
Operating
Turn the thermostat switch to max or
min. Position to turn on or turn off the
unit. To benefit from the unit is at op-
timum level, ensure that it is mounted
in correct place and operated in
proper environments. (If the heater is
used in internal areas, heating areas
must not be exposed to open areas
such as window, balcony). If the unit
is not operated for a long time or
while replacing the unit, the cable or
cord must be unplugged.
Note: in the models with On-Off but-
ton use
run it. When the thermostat button is
set to the desired temperature de-
gree, it will activate with half-power
and full-power in order to fix room
temperature. In this way, more eco-
nomic heating is possible by achieving
energy saving.
Authorized service
Contact with your dealer for damages
and/or repairs being within the scope
of warranty.
Cleaning
If it is desired, the unit can be cleaned
with soft doth damped with cleaning
agent. Never use flammable, combus-
tible chemicals such as spirit and simi-
lar agents for the purpose of cleaning.
Read the safety instructions for long
service life of your heater. Never op-
erate your heater in vertical position,
do not replace while operating. If you
come up with cord failure or any prob-
lems in your heater, contact our au-
thorized service immediately. Do not
attempt to repair your heater yourself
or get it repaired by unauthorized per-
sons. Failures arising from interven-
tion of unauthorized persons or use
mistakes are not included to the scope
of warranty. Our company is not liable
for such failures. In these cases, even
if warranty period does not expire,
warranty will be void. We recommend
a long-handled and thing duster brush
for your unit depending on dust and
dirt amount. When the unit is opened
by authorized personnel for any pur-
pose, it can be cleaned with damp
4
button of your heater to
Advertisement
