Dimensions; Installation Instructions; Unpacking - Electrolux EWF1110 Manual

14 dimensions / installation instructions electrolux front loading washing machine

Dimensions

603mm
66mm
216mm
63mm
851mm
601mm
SIDE
559mm
92mm
650mm
717mm
686mm
171mm
BACK
584mm
686mm

Installation instructions

Unpacking

All transit bolts and packing must be removed before using
the appliance.
You are advised to keep all transit devices so that they can
be refitted if the appliance ever has to be transported again.
1. After removing all the packaging, carefully lay the
appliance on its back. Use a rug, blanket or piece of
cardboard to protect the floor.
2. Remove the polystyrene base from the bottom and the
shipping plug.
Base
Shipping
plug
3. Carefully return the appliance to an upright position.
4. With a suitable spanner unscrew and remove the
following from the rear of the appliance:
- 4 shipping bolts
- 4 spacers
- 3 plastic "P" clamps
Remove:
3 plastic "P" clamps
Remove:
4 shipping bolts,
4 spacers
5. Remove the power supply cable, the draining hose and
the inlet hose from the hose clips on the rear of the
appliance.
6. Remove the 4 plugs from the literature pack located in
the drum and install them in the holes vacated by the
packaging spacers.
Power cord
Don't remove:
2 hose clips