Advertisement
68P64115A21–B
Sept 2003
GPIB Cables
Hewlett Packard 10833A or equivalent; 1 to 2 meters (3 to 6 feet) long
S
used to interconnect test equipment and LMF terminal.
Timing Reference Cables
Two BNC-male to BNC-male RG316 cables; 3.05 m (10 ft.) long.
S
Used to connect the communications analyzer to the front timing
reference of the CSM cards in the BTS frame.
Digital Multimeter
Fluke Model 8062A with Y8134 test lead kit or equivalent; used for
S
precision dc and ac measurements, requiring 4–1/2 digits.
Directional Coupler
Narda Model 30445 30 dB (Motorola Part No. 58D09643T01 )
S
800 MHz coupler terminated with two Narda Model 375BN–M loads,
or equivalent.
RF Terminations/Loads
At least three 100–Watt (or larger) non–radiating RF
S
terminations/loads.
Miscellaneous RF Adapters, Loads, etc
As required to interface test cables and BTS equipment and for
S
various test set ups. Should include at least two 50 Ohm loads (type
N) for calibration and one RF short, two N–Type Female–to–Female
Adapters.
LAN Cable
BNC–to BNC 50 ohm coaxial cable [.91 m (3 ft) maximum] with an
S
F–to–F adapter, used to connect the 10BaseT–to–coaxial adapter to
the BTS LAN connector.
High–impedance Conductive Wrist Strap
Motorola Model 42–80385A59; used to prevent damage from
S
Electrostatic Discharge (ESD) when handling or working with
modules.
1X SC 4812T-MC Multicarrier BTS Optimization/ATP
Required Test Equipment and Software
1
1-11
Advertisement
Chapters
