Advertisement
Foreword
Foreword
Scope of manual
Obtaining Manuals
Text conventions
xviii
This manual is intended for use by cellular telephone system
craftspersons in the day-to-day operation of Motorola cellular system
equipment and ancillary devices.
This manual is not intended to replace the system and equipment
training offered by Motorola, although it can be used to supplement or
enhance the knowledge gained through such training.
To view, download, order manuals (original or revised), visit the
Motorola Lifecycles Customer web page at http://services.motorola.com,
or contact your Motorola account representative.
If Motorola changes the content of a manual after the original printing
date, Motorola publishes a new version with the same part number but a
different revision character.
The following special paragraphs are used in this manual to point out
information that must be read. This information may be set-off from the
surrounding text, but is always preceded by a bold title in capital letters.
The three categories of these special paragraphs are:
NOTE
Presents additional, helpful, non-critical information that you can
use.
Bold-text notes indicate information to help you avoid
an undesirable situation or provides additional information
to help you understand a topic or concept.
CAUTION
Presents information to identify a situation in which equipment
damage could occur, thus avoiding damage to equipment.
WARNING
Presents information to warn you of a potentially hazardous
situation in which there is a possibility of personal injury.
The following typographical conventions are used for the presentation of
software information:
In text, sans serif BOLDFACE CAPITAL characters (a type style
S
without angular strokes: i.e., SERIF versus SANS SERIF) are used to
name a command.
In text, typewriter style characters represent prompts and the
S
system output as displayed on an operator terminal or printer.
In command definitions, sans serif
S
parts of the command string that must be entered exactly as shown and
typewriter style characters represent command output responses
as displayed on an operator terminal or printer.
In the command format of the command definition, typewriter
S
style characters represent the command parameters.
1X SC 4812T-MC Multicarrier BTS Optimization/ATP
68P64115A21–B
characters represent those
boldface
Sept 2003
Advertisement
Chapters
