Setting The Options (Nt4X25Af /Ag /Ah /Ak) - Northern Telecom DMS-100 Series Installation And Maintenance Manual

0
0
0 If asynch autobaud is selected on the RS-232C data unit,
0 following DTE speeds are supported:
0 * 50 bps
0 * 75 bps
0 * 110 bps
0 * 134.5 bps
0 * 150 bps
0 * 300 bps
0 * 600 bps
0 * 1200 bps
0 * 1800 bps
0 * 2000 bps
0 * 2400 bps
0 * 3600 bps
0 * 4800 bps
0 * 7200 bps
0 * 9600 bps
0 * 19200 bps
0

Setting the Options (NT4X25AF /AG /AH /AK)

0 Under the flip-up lid on the face of the data unit are a series
0 of LEDs. These LEDs are used to set the DU to the desired
0 ating parameters.
0 option, see Controls and Indicators (NT4X25AA /AE /AF /AG /AH /AK
0 /AN /AP /AX /AZ) on page 3-11.
0 To set an option:
0 1. Press the
0 key flashes.
0 To set an alternate option, press the Settings
0 Alternate
0 key lights steadily.
0 tings key flashes.
0 2. Use the numeric keys on the keypad
0 When an option is selected, the corresponding LED is lit.
0 The LEDs,
0 through a series of choices.
0 mutually
0 Protocol 2).
0 be unselected.
0 To set the operating speed (NT4X25AF /AH):
0 You can set the data unit to operate at one
0 Only six of the available speeds are listed under the DU flip-up
0 lid. To select a speed that is not listed, perform the following
0 steps:
0
For a detailed description of each feature and
Settings key.
key. The Led located to the left of the Alternate
The LED located to the left of the Set-
when pressed,
exclusive (e.g.,
Selecting one option will cause the other(s) to
The LED located to the left of the
to select
either toggle on and off, or move
Some option
Keyboard Dialing Protocol 1 and
of
297-2121-226
VINTAGE 05.01
the
oper-
key and the
the options.
selections are
sixteen speeds.
4-7