Panasonic KX-TG9581B Service Manual page 63

When adjust the frequency the BT Unit.
Item
1 Power on
2 Test mode
3 Confirm a default value
4 Adjust the frequency
Note:
: Enter key
11.6.1.1.1. How to written to USB_IC
System requirements (PC)
Item
CPU
RAM
OS
Microsoft
Office
Outlook
Hard disk
Video
resolution
Others
11.6.1.1.2.
11.6.1.1.3. Downloading software (preparation)
(1) CP210x_VCP_Win_XP_S2K3_Vista_7.exe
You can download the software from Web site as below.
https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
Click Download for Windows XP/Server 2003/Vista/7 (v6.3a)
Activate "CP210x_VCP_Win_XP_S2K3_Vista_7.exe" from CDROM (PNZZTG9581B) in the "Driver" folder, and follow the wizard
(2) CP210xSetIDs.exe
https://www.silabs.com/PRODUCTS/INTERFACE/USBTOUART/Pages/usb-to-uart-bridge.aspx
Click tools
Copy "an144sw.zip" to an appropriate folder
(3) Installing the "Telephone Plug-in"
Test command
Input
-
sendchar XBT 1
sendchar #X ts
sendchar #X nc
sendchar #X b3 39 19
sendchar nc,,
Specifications
ｮ ｮ
1.0 GHz Intel Pentium /Celeron
processor or comparable CPU or
higher processor
512 MB or more
L
ｮ
Microsoft Windows XP
Service Pack 3 or later (32-bit
only)
L
ｮ
Microsoft Windows Vista
Service Pack 2 or later
L
Microsoft Windows 7
Service Pack 1 or later
L
Microsoft Office Outlook 2003
Service Pack 3 or later
L
Microsoft Office Outlook 2007
Service Pack 2 or later
L
Microsoft Office Outlook 2010
or later (Service Pack)
20 MB or more
1,024 x 768 or higher
L
CD-ROM drive
L
USB 2.0
VCP DRIVER Kit
Echo back
- Wait 10seconds and connect JIG
OK Enter"XBT 1" and then "OK" is back
#XXTEST when it succeeds to enter test mode.
#XXnc=0x1A Confirm a default value before adjusting the
frequency.
#XXTS ch=2441 pwr=19 Adjust the frequency to "2441MHz ± 10kHz" by
changing the value of,
#XXnc=0x,, Test Point: ANT_BT, refer to Bottom View
(P.58)
CD ROM
ｮ
63
KX-TG9581B/KX-TG9582B/KX-TGA950B
Description
PNJX1009Z
PNZZTG9581B
(They are available at web site)