Troubleshooting - IBM 6736-HB0 User Manual

Troubleshooting

22
If you have a problem setting up or using your monitor, you may be able
to solve it yourself. Before calling your retailer or IBM, try the suggested
actions that are appropriate to your problem.
Possible
Problem
Cause
No power to
Screen is
monitor.
blank and
power
indicator is off.
Screen is blank Brightness
and power
and Contrast
indicator is may be too
steady green.
low.
Screen is blank The monitor is
and power in the Power
indicator is Management
steady amber. Standby state.
Suggested Action
• Ensure that the electrical outlet
and the monitor are both
switched on.
• Check that the power cord
is firmly plugged into the
electrical outlet and the power
supply unit.
• If the power cord plug has
a removable fuse, replace it.
• Try another power cord.
• Try another electrical outlet.
• Check the power connection at
the back of the panel.
• Adjust brightness and contrast.
• Press any key on the keyboard
or move the mouse to restore
operation.
• Check the Power Management
software on your computer.
• Press the
to switch between
analog and digital mode. If the
panel is the wrong mode for
the signal being provided, the
monitor appears to go into
sleep mode.
Reference
Connecting
your
Monitor
section on
page 7.
User
controls
section on
page 17.
Power
Management
section on
page 21.