Table of Contents
Advertisement
Troubleshooting
20
If you have a problem setting up or using your monitor, you may be able
to solve it yourself. Before calling your retailer or IBM, try the suggested
actions that are appropriate to your problem.
Possible
Problem
Cause
No power to
Sreen is blank
and power
monitor.
indicator is off.
Brightness
Sreen is blank
and Contrast
and power
may be too
indicator is
low.
steady green.
Sreen is blank
The monitor is
and power
in the Power
indicator is
Management
steady amber.
Standby state.
Suggested Action
• • Ensure that the electrical outlet
and the monitor are both
switched on.
• • Check that the power cord
is firmly plugged into the
electrical outlet and the power
supply unit.
• • If the power cord plug has
a removalble fuse, replace it.
• • Try another power cord.
• • Try another electrical outlet.
• • Adjust brightness and contrast.
• • Press any key on the keyboard
or move the mouse to restore
operation.
• • Check the Power Management
software on your computer.
• •
Press the
to switch
between analog and digital
mode. If the panel is the wrong
mode for the signal being
provided, the monitor appears
to go into sleep mode.
Reference
Connecting
your
Monitor
section on
page 4.
User
controls
section on
page 13.
Power
Management
section on
page 19.
Advertisement
Table of Contents
