Disassembly Procedure; Control Box; Thermistor (Intake Air) - Mitsubishi Electric PEY Series Service Manual

DISASSEMBLY PROCEDURE

10. DISASSEMBLY PROCEDURE

10-1. Control box

1. Removing the control box cover
(1) Remove the two fixing screws on the cover (A) to
remove it.

10-2. Thermistor (Intake air)

1. Remove the control box cover according to the
procedure in section 10-1. Control box (page43).
(1) Pull out the thermistor holder (B) and thermistor
(C) on the control box.
HWE1305A
Exercise caution when removing heavy parts.
(A)
Fig. 1
Fig. 2
(B),(C)
Fig. 3
43