Heat Exchanger - Mitsubishi Electric PEY Series Service Manual

DISASSEMBLY PROCEDURE

10-6. Heat exchanger

1. Remove the drain pan according to the procedure in
section 10-3. Drainpan (page44).
2. Remove the heat exchanger cover according to the
procedure in section 10-4. 2. Removing the Heat
exchanger cover (page45).
3. Removing the cover
(1) Remove the five fixing screws on the cover (K) to
remove it.
4. Removing the Heat exchanger
(1) Remove the fixing screws on the heat exchanger
(L) to remove it.
HWE1305A
Exercise caution when removing heavy parts.
Fig. 12
Fig. 13
(L)
47
(K)