MULTIQUIP Mikasa Series Operation And Parts Manual page 19

Symptom
Engine runs but rammer jumps
erratically or not at all.
MTX70HF RAMMER • OPERATION AND PARTS MANUAL — REV. #2 (08/26/19) — PAGE 19
Troubleshooting (Rammer)
Possible Problem
Operating speed of throttle lever is
incorrectly set?
Oil in excess?
Clutch slips?
Spring Failure?
Speed of engine improper?
Soil over-compacted?
TROUBLESHOOTING
Solution
Set throttle lever to correct position.
Drain excess oil. Bring to correct level.
Replace or adjust clutch.
Replace spiral spring.
Adjust engine speed to correct
operating RPM setting.
Shut down machine and test soil.