Mute Level Setting; Remote Control Amp Button Setting; Remote Control Input (Rs-232C) Connector Setting; Trigger Signal Output Setting - Esoteric N-05XD Owner's Manual

MENU 3 (continued)

Mute level setting

MTLV>***
This sets the volume when it is muted.
o By default, the setting is −∞dB.
−∞dB
The volume becomes −∞ dB when muted.
−20dB
The volume is reduced 20 dB from the set level when muted.

Remote control AMP button setting

AMPRM>***
Set whether the remote control AMP section buttons are enabled or
disabled.
o By default, the setting is ON.
o When using this unit connected to an ESOTERIC integrated ampli-
fier or preamp, set this to OFF.
ON
This enables the INPUT (l/;), SETUP, VOLUME (+/−) and MUTE
buttons in the AMP section of the remote control.
o Use the above SETUP and INPUT (l/;) buttons to set the L/R
balance (BAL>) and input gain (LVL>) (page 24).
OFF
This disables the INPUT (l/;), SETUP, VOLUME (+/−) and MUTE
buttons in the AMP section of the remote control.
o Use MENU 1 to change L/R balance (BAL>) and input gain
(LVL>) settings.
30
Remote control input (RS-232C) connector
setting
RS232C>***
Set this to ON only when using the remote control input (RS-232C)
connector.
o By default, the setting is OFF.
OFF
The remote control input (RS-232C) connector cannot be used.
ON
The remote control input (RS-232C) connector can be used.

Trigger signal output setting

TRIG_O>***
o By default, the setting is OFF.
OFF
Do not output trigger signals.
ON
Output trigger signals.