Volume Display Setting; Analog Audio Output Connector Setting; Automatic Display Dimming Setting; Automatic Power Saving Setting - Esoteric N-05XD Owner's Manual

Table of Contents

Advertisement

MENU 1 (continued)

Volume display setting

VOLDP>***
This sets the units used to show the volume on the display.
STEP
This shows the volume in steps.
This can be adjusted from 0 to 100 in 0.5 steps.
dB1
This shows the volume in decibels.
This can be set to −∞ and −95.0 to +24.0 dB in 0.5dB increments.
dB2
This shows the volume in decibels.
This can be set to −∞ and −95.0 to 0.0 dB in 0.5dB increments.

Analog audio output connector setting

LOUT>***
Use this to select the analog audio output (LINE OUT) connectors to
be used.
o By default, the setting is XLR2.
ESLA
Analog audio signals are output as ES-LINK Analog (ESL-A)
through the XLR connectors.
o These connections use ordinary XLR cables, but the signals are
transmitted in a unique format, so this setting should only be
used with compatible devices.
o See page 9 for more about ES-LINK Analog (ESL-A).
XLR2
Analog audio signals are output through the XLR connectors with
pin 2 HOT.
XLR3
Analog audio signals are output through the XLR connectors with
pin 3 HOT.
RCA
Analog audio signals are output through the RCA connectors.
26

Automatic display dimming setting

DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is ON.
o If the OEL display is left on with the same indication for a long
time, brightness irregularities can occur. For this reason, we rec-
ommend that you set the automatic display dimming function to
ON.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
OFF
The display will not turn off automatically.
o If no operation is conducted for ten minutes, the display will
dim to DIMMER 1 brightness to protect it from excessive wear.

Automatic power saving setting

APS>***
If there is no input from the selected input source for the set time, the
unit will enter standby mode automatically.
o By default, the setting is OFF.
o The input sources that are not selected have no effect on auto-
matic power saving.
OFF
The automatic power saving function is disabled.
30m
30 minutes
60 m
60 minutes
90 m
90 minutes
120 m
120 minutes

Advertisement

Table of Contents
loading

Table of Contents