Remove And Replace; Introduction; Basic Checks - Simplicity Legacy Series Service & Repair Manual

9 Drive Control Service

Introduction

Figure 4. Drive Controls

REMOVE AND REPLACE

Introduction
The drive train consists of a piston type Sundstrand 15
series hydro pump and a Peerless 2600 transaxle. The
Legacy Tractor is equipped with a dual range system
(two speed transaxle) featuring a locking differential.

Basic Checks

1. Check fluid level (see Section 3, MAINTENANCE).
2. Add fluid if needed.
3. Check for bulging in hydraulic hoses.
4. Start engine run for three minutes.
5. Turn key to stop.
6. Check for leaks.
7. Replace or repair any leaking hoses or fittings.
9 - 8