Roland FAVORITE ON-OFF Series Service Manual page 53

3. Electrical parts
Note: Remove the air outlet grille(refer to 1. Panel plate) before disassembling electrical parts.
FU-07HSS010/N2-OUT; FU-12HSS010/N2-OUT; FU-18HSS010/N2-OUT
Procedure
1) Remove the two screws fixed the
electronic control board (see CJ_
ODU_007).
2) Disconnect the wires connected to
the compressor. (Black wire connects
with terminal 1,blue wire and red
wire connect with the compressor
capacitor) (see CJ_ODU_007)
3) Disconnect the wires connected to
4-way valve.(Blue wires on terminal
2&3) (see CJ_ODU_007)
4) Remove the fixing screw of the
compressor capacitor, then pull it out
(see CJ_ODU_007)
5) Remove the electrical parts (see CJ_
ODU_007)
Note: This sec�on is for reference only. Actual unit appearance may vary.
Page 50
Illustra�on
Two Fixing Screws
Wires Of Compressor
Connectors for fan motor
Terminal 1 to 4
CJ_ODU_007