Roland FAVORITE ON-OFF Series Service Manual page 49

2. Fan disassembly
Note: Remove the panel plate and (refer to 1. Panel plate) before disassembling fan.
FU-07HSS010/N2-OUT; FU-12HSS010/N2-OUT; FU-18HSS010/N2-OUT
Procedure
1) Remove the nut securing the fan
with a spanner (see CJ_ODU_001).
2) Remove the fan.
3) Disconnect the connectors for fan
motor. (Blue wire, yellow wire, red
wire, brown wire and black wire. The
blue wire and red wire are on the
capacitor. The black wire connects
with terminal 4.) (see CJ_ODU_002)
Note: This sec�on is for reference only. Actual unit appearance may vary.
Page 46
Illustra�on
D-cut
Connectors for fan motor
CJ_ODU_001
Terminal 1 to 4
CJ_ODU_002