Roland FAVORITE ON-OFF Series Service Manual page 51

RC-T 76HN/OUT
Procedure
1) Remove the nut securing the fan
with a spanner (see CJ_ODU_004).
2) Remove the fan.
3) Disconnect the connectors for fan
motor. (Blue wire, red wire, brown
wire and black wire. The blue wire
and brown wire are on the capacitor.
The black wire connects with a
terminal. And the red wire is on the
borad.) (see CJ_ODU_005)
Note: This sec�on is for reference only. Actual unit appearance may vary.
Page 48
Illustra�on
D-cut
CJ_ODU_004
Fan Motor
CJ_ODU_005