Table of Contents
Advertisement
Output Audio
You can output audio from the unit to an external amplifier or powered speakers.
1.
Using audio cables with RCA plugs (not included), connect the RCA audio outputs
labelled "Front Output", "Rear Output" and "Sub Output" on the unit to the
corresponding RCA audio inputs on your amplifier or powered speakers.
2.
Start playback on the unit and audio will be output to the connected device.
Accessory Power Control
The unit comes with an accessory power switch which can turn on or off a connected
accessory (not included, e.g. a light bar or LED whip).
1.
Connect the red/purple wire (labelled "Aux Power Output") from the unit to an accessory.
2.
When the unit is powered on, press
accessory.
- When accessory power is on, the
Screen Illumination Control
The unit comes with an illumination wire which is used for screen illumination control.
1.
Connect the orange wire (labelled "Illumination Input") from the unit to your vehicle
lights. When the vehicle lights are on, the unit's screen will be automatically illuminated.
Use Rear/Front Camera
WARNING: Never rely solely on the rear view camera when reversing your vehicle. Always
check your surroundings before reversing your vehicle.
1.
Connect a rear or front camera (not included) to the unit. See the installation manual of
your camera for more details.
• Video signal input
Using the "Rear Camera Input" wire with RCA jack (Orange, not yellow), display live
on the front panel to turn on or off the connected
icon is displayed in the top of the screen.
14
Advertisement
Table of Contents
