Panasonic WX-CC411BP Operating Instructions Manual page 41

Cross Beep (WX-CC412BP only)
"Cross Beep" is a function that enables a beep tone to be
heard from the All-In-One Headsets or Belt Packs when a
customer approaches the order post of the other lane.
1
Touch (Quick Operation button) on the
touch panel, and then touch the [Common]
button.
2
Touch the [ON] button for [Cross Beep] to
enable Cross Beep operation.
p p To release Cross Beep, touch the [OFF] button.
OFF:
If lane A has been selected, beep tone A will be heard when
a vehicle in lane A is detected.
However, beep tone B will not be heard even when a vehicle
in lane B has been detected.
ON:
If lane A has been selected, beep tone A will be heard when
a vehicle in lane A is detected.
Furthermore, beep tone B is heard at a low volume level
even when a vehicle in lane B has been detected.
When vehicles have been detected in both lanes, beep tone
A and beep tone B, which are heard at a low volume level,
will be heard alternately.
Vehicle detector
Cross
Lane A is Lane B is
Beep
ON ON
–
¡
OFF –
¡
¡ ¡
–
¡
–
¡
ON
¡ ¡
WX-CC411BP_PUQX1028ZAV1_IG.indb 41
All-In-One Headset or Belt Pack
A B
–
Beep A
– Beep B
Beep A Beep B
Beep A Low level Beep A
Low level Beep B Beep B
Beep A + Beep B +
Low level Beep B Low level Beep A
Cross PAGE (WX-CC412BP only)
"Cross PAGE" is a function that enables talking (PAGE)
between all store personnel in both lane A and lane B.
1
Touch (Quick Operation button) on the
touch panel, and then touch the [Common]
button.
2
Touch the [ON] button for [Cross PAGE] to
enable Cross PAGE operation.
OFF:
PAGE is possible with the All-In-One Headsets and Belt
Packs in each of lane A and lane B.
ON:
PAGE is possible with all of the All-In-One Headsets and
Belt Packs in both lane A and lane B.
41
2022/03/07 11:26:42