Table of Contents
Advertisement
Remote Control Description
Inserting batteries in the Remote Control Unit
1) Slide open the back cover of the remote control.
2) Insert two AAA batteries
3) Replace the cover
NOTES:
• Be sure not to mix the worn batteries with the new batteries.
• Remove batteries when not in use for an extended period.
• Batteries should not be used longer than a year.
• The remote control should be at a distance of minimum 1 meter away from a television set
or other audio device.
Emergency Operation
If the wireless remote control is lost or broken, use the manual
switch inside de unit. This will place the system in the AUTO mode,
thus settings for fan speed and temperature cannot be changed. To
allow for control, using a ball point pen or similar device, do the
following:
To turn the unit ON: With the unit off, locate the Manual Switch and
with the ball point pen press the manual switch as shown. The unit
will automatically go into the AUTO state of operation. The microcom-
puter will detect the indoor temperature to select COOL, HEAT, FAN to
achieve the degree of comfort.
To turn the unit OFF: With the unit on, locate the manual switch
STOP button. The unit will stop running.
MS-SVX10A-EN
14
Advertisement
Table of Contents
