Table of Contents
Advertisement
Available languages
Available languages
^ Maintenance and care
General information
A Risk of electric shock!
Switch off the eiectricity before
cieaning appliance to avoid an
eiectric shock.
A Hot surfaces may cause burns!
Allow the appliance to cooi down
before you clean it.
rSl The surface may get damaged by
some detergents or cieaning
materiais.
Do not use aggressive
detergents, cieaning
powder/cream or any sharp
objects.
Clean the appliance thoroughly after
each use; in this way it will be possible
to remove cooking residues more
easily, thus avoiding these from
burning the next time the appliance is
used.
No special cleaning agents are
required for cleaning the appliance. It
is recommended to use warm water
with washing liquid, a soft cloth or
sponge and use a dry cloth for drying.
Do not use steam cleaners for
m
cleaning.
Cleaning the control panel
[il Damage of the control panel!
Do not remove the control knobs
for control panel cleaning.
Clean control panel and control knobs.
Cleaning the oven
No oven cleaner or any other special
cleaning agent is required for cleaning
the oven. It is recommended to wipe
the oven with a damp cloth while it is
still warm.
To clean the side wall,
1. Remove the front section of the
side rack by pulling it in the
opposite direction of the side wall.
2.
Remove the side rack completely
by pulling it towards you.
Side walls or just back wall of oven
interior may be covered with catalytic
enamel.
The catalytic walls of the oven must
not be cleaned. The porous surface of
the walls is self-cleaning by absorbing
and converting spitting fat (steam and
carbon dioxide).
Don't use any harsh abrasive cleaners
or sharp metal scrapers for cleaning
the oven door. They could scratch the
surface and destroy the glass.
Advertisement
Table of Contents
