Securing Fan To Secondary Support System - Hunter 42679-01 Owner's Manual And Installation Manual

4 • Securing Fan to Secondary Support System
4-1. Find the looped end of the braided cable and insert it through the
ceiling plate and one of the holes in the outlet box into the ceiling.
4-2. Access the support brace in the ceiling. You may not be able to do
this from below the ceiling depending on your installation site.
4-3. Drive a wood screw and washer into the side of the brace that
holds the outlet box. Leave 3mm (1/8") of space between the
support brace and the washer.
4-4. Wrap the braided cable around the support brace once creating a
complete circle.
4-5. Hook the looped end of the cable over the wood screw so that the
braided cable lies between the washer and the support brace.
4-6. Tighten the loop and secure the screw and washer all the way
down to the support brace.
4-7. Coil up the excess cable.
4-8. Return to the fan so you can complete the fan wiring.
Steps 4-2 – 4-3
3mm (1/8")
Support
Brace
Outlet Box
Ceiling
Steps 4-4 – 4-5
Braided
Cable
7
42679-01 • 01/15/09 • Hunter Fan Company
Step 4-1
Steps 4-6 – 4-7