Connector Panel; Pin Assignment Of Input And Output Connectors - Sony PCM-1630 Operation And Maintenance Manual

1-5-2. Connector Panel
ANALOG connectors
WORD SYNC connectors
COMPOSITE SYNC connectors and
75-ohm termination switch
STATUS output connector
G)
DIGITAL I/O connectors
Ground terminal
®
COMPOSITE DIGITAL connectors
"--' AC IN connector
(BNC type)
(j)
COMPOSITE DIGITAL connectors (8-pin)----_j
VOLTAGE SELECTOR
(})ANALOG connectors (equivalent to Cannon
XLR type)
Analog audio signals are input to or output
from these connectors.
When optional DABK-1631 digital I/0 boards
are installed, instead of using the AD-23
and DA-15 boards to provide the unit with a
digital interface which conforms to the
AES/EBU standards, supply a digital input
signal to the INPUT CH-1 (D-I) connector.
The unit's digital output signal is
supplied from the OUTPUT CH-1 (D-0)
connector.
Pin assignment of INPUT and OUTPUT
connectors
For the models
available in
the United
States, Canada
and Jaoan
l .
Ground
2. Cold
3. Hot
INPUT
For the model
available in
European coun-
tries
l.
2.
3.
Ground
Hot
Cold
OUTPUT
u
\J(J
1-10 (E)