Electrical Connection; General; Additional Ground Conductor On Motors - Bosch Rexroth MAD Project Planning Manual

MAD / MAF Asynchronous Housing Motors
11.4

Electrical connection

11.4.1

General

11.4.2

Additional ground conductor on motors

Fitting
Fig. 11-2: Fitting the transmission element
Use the centering hole for fitting transmission elements. For details on cen‐
tering holes, please refer to the project planning of
Heat the transmission element, if necessary.
Use ready-made connection cables by Bosch Rexroth. These cables have
numerous benefits, e.g. extreme resilience and resistance as well as EMC-
compliant design.
● Perform the electrical connection of the MAD/MAF motors according to
the instructions in the chapter 8 "Connection technology".
The connection diagrams of the product documentation serve to
create system circuit diagrams. The drive components have to be
connected in the machine exclusively according to the machine
manufacturer's system circuit diagrams.
When being connected, some of the motors have to be equipped with an ad‐
ditional ground conductor. For more information about this additionally re‐
quired ground conductor, please refer to
conductor on motors" on page
chapter 8.2.2 "Additional ground
174.
R911295781_Edition 11 Bosch Rexroth AG
245/265
Installation
MAD/MAF motors.