Transportation, Storage And Disposal; Technical Data - Husqvarna MADSAW 525iDEPS Operator's Manual

Transportation and storage
Note:
Variations in temperature can lead
to pressure in the oil tank with temporary
oil leakage as a result. Follow the storage
instructions.
• Clean the product and empty the oil tank
before you put the product in storage.
• Put the product in a horizontal position
or hung with the bar pointed down during
storage.
• Do not put the product with the bar pointed
up during storage.
• The approved Li-ion batteries obey
the Dangerous Goods Legislation
requirements.
• Obey the special requirement on package
and labels for commercial transportation,
including by third parties and forwarding
agents.
• Speak to a person with special training
in dangerous material before you send
the product. Obey all applicable national
regulations.
• Use tape on open contacts when you put
the battery in a package. Put the battery in
the package tightly to prevent movement.
• Remove the battery for storage or
transportation.
• Put the battery and the battery charger in
a space that is dry and free from moisture
and frost.

Technical data

Motor
Motor type
Oil tank capacity, US pt/litre
Weight
Weight without battery, Lbs/kg
Water protection level
1
IPX4
1744 - 004 - 22.03.2022

Transportation, storage and disposal

Technical data
• Do not keep the battery in an area where
static electricity can occur. Do not keep the
battery in a metal box.
• Put the battery in storage where the
temperature is between 5 °C (41 °F)
and 25 °C (77 °F) and away from open
sunlight.
• Put the battery charger in storage where
the temperature is between 5 °C (41 °F)
and 45 °C (113 °F) and away from open
sunlight.
• Charge the battery 30% to 50% before you
put it in storage for long periods.
• Put the battery charger in storage in a
space that is closed and dry.
• Keep the battery away from the battery
charger during storage. Do not let children
and other not approved persons to touch
the equipment. Keep the equipment in a
space that you can lock.
• Use the transportation guard on the
product to prevent injuries or damage
on the product during transportation and
storage.
• Attach the product safely during
transportation.
• This product is a special tool with a
dielectric shaft section. The dielectric shaft
section must be removed, put in the
storage bag, and kept in a safe location for
storage and transportation. Do not put the
product into storage assembled.
BLDC (brushless) 36V
0.4/0.2
11.02/5
Yes
27