HP ProCurve Switch 212M Management And Configuration Manual page 83

Press [E] (for Edit). The cursor moves to the Send Authentication Traps field.
2.
3. Press the Space bar to enable (Yes) or disable (No) sending authentication
traps, then press [>] or [Tab] to move the cursor to the Address field.
4. Type in the IP address of a network management station to which you
want the switch to send SNMP trap packets, then press [>] or [Tab] to move
the cursor to the Community field.
5. Type in the name of the SNMP community to which the network manage-
ment station belongs, then press [>] or [Tab] to move the cursor to the Events
field.
6. Press the Space bar to select the level of internal switch events that cause
trap packets to be sent:
Event Level Description
None (default) Send no log messages.
All Send all log messages.
Not INFO Send the log messages that are not information-only.
Critical Send critical-level log messages.
Debug Reserved for HP-internal use.
Press [Enter], then press [S] (for Save) and return to the Switch Management
7.
Access Configuration menu.
Configuring the Switch
Trap Receivers
6-19