Advertisement
INFORMATION ON THE FLYING HARDWARE FOR THE
LARK Halo (Available Separately)
CAUTION ! Before attempting to suspend any LARK Rigging Hardware with or without speakers
hung from it, consult a certified structural engineer. The Halo/Fly Bar and/or speaker array can fall from
improper suspension, resulting in serious injury and property damage. Use only the correct mating hardware.
All associated rigging is the responsibility of others.
This PEAVEY loudspeaker should be suspended overhead only in accordance with the procedures and limitations
specified in the User's Manual and possible manual update notices. This system should be suspended with
certified rigging hardware by an authorized rigging professional and in compliance with local, provincial or
national suspension ordinances.
Whenever possible, in addition to the nominal primary mounting method, use a suitable safety chain or wire rope
attached to one of the other groups of fly points, and firmly attached to a suitable structural member as indicated
by a certified structural engineer. CAUTION: ALWAYS USE SAFETY CHAIN OR WIRE ROPE.
Connects the Lark
18S
4x8mm quick locking pins are provided on the halo to suspend the Lark 18S Sub speakers.
SPECIFICATIONS
Halo Only Dimensions H x W x D:
3.54" x 32.28" x 27.56" (90mm x 820mm x 700mm)
Weight: 50.7lbs. / 23kg
Material: The whole halo is made of 3mm iron plate welded, the shape is in the shape of a field, and the middle of
halo is hollow.
Finish: Entire Halo is flat black powder coated paint finish.
Working Load Limit: 300 kg / 661 lbs. for Ultimate Strength Design Factor of 10:1
(This meets PLASA North America criteria and typically exceeds local USA safety requirements.)
Working Load Limit: 250kg / 551 lbs. for Ultimate Strength Design Factor of 12:1
(This is in compliance with the European Union mandated Safety Factor)
Maximum Number of Lark
(Note:
Lark 18S
Sub cabinets do NOT articulate or angle, they must be hung at a zero degree angle.)
Can fly up to 5
Lark 18S
Sub speakers and
Lark 10
770
820
18S
cabinets: 5
, or 10
Lark 10
.
to the overhead rigging.
90
9
Advertisement
