Advertisement
INSTALLATION DIAGRAM OF LARK LINEAR ARRAY SPEAKER SYSTEM
1. Array frame
Installation method of the shackle (Two ways to fix the shackle according to practical application).
Figure 1: one-point flying
Figure 2: two-point flying
2. Pull out the pins on both sides of the subwoofer and press the front link out.
Pull out the rear pins to take out the rear link so that it is vertical.
3. Installation of array frame and subwoofer
Take out the front pin of the array frame, take out the independent rear connecting rod,
and install it to the corresponding position.
Install
rear link
5
Advertisement
