To do all of these electrical adjustments, the following equipment is required.
1. Dual-Trace Oscilloscope
Voltage Range: 0.001 V to 50 V/Div.
Frequency Range: DC to 50 MHz
Probes: 10:1, 1:1
2. NTSC Video Pattern Generator
3. DVM (Digital Volt Meter)
4. MTS/SAP Signal Generator
(TV Multi-Channel Sound Modulator (U.S.A.))
5. Plastic Tip Driver and Non-Metal Driver
6. Isolation Transformer (Variable)
7. VHS Alignment Tape (VFMS0003H6)
8. Degaussing Coil
9. White Pattern Generator
10. Audio Generator
11. DVD Test Disc
7.3.2. HOW TO READ THE ADJUSTMENT PROCEDURES
7.3.3. STEREO/SAP SEPARATION ADJUSTMENT
Note:
Remove the DVD unit before performing this adjustment.
Fig. E1
57