Digigate Device - DigiTech digiGate User Manual

3 DIGIGATE DEVICE

Switch terminals
USB Ports
This is where the GSM dongle and
wireless adapters are plugged in.
Ethernet Network Port
This is where the ethernet cable
connects to. The other end
connects to your router or power-
over-ethernet device to connect
your digiGate to the internet.
Power
Switch terminals
1 - (NO) Normally Open
2 - (COM) Common
3 & 4 - digiGate factory reset
5 - (NC) Normal Closed
6 - (NO) Normally Open - Only
available on Multi-push or Dual
Door garage system .
7 - (COM) Common - Only
available on Multi-push or Dual
Door garage system .
These are where the switch cables
that connect to your electric gates/
garage/switchable device are
inserted.
4 x USB Ports
Ethernet
Network Port
7