Installation - Sony SS-X7A Operating Instructions Manual

Installation

Monitor
Angle adjustment screw
Attachment holes
1
Insert the supplied screws (2 each for the right/left side)
into the attachment holes of the monitor, and tighten the
screws completely by using a coin.
2
Loosen the angle adjustment screws and open the
pedestal. Hook the speaker to the screws which is
inserted in step 1.
Push down the speaker until it stops, and fix it firmly.
3
Adjust the angle of the speaker, and tighten the
adjustment angle screws.
To remove the speakers
Take off the speaker pulling it up slightly.
The SS-X7A can be installed in the following Trinitron
color monitors. Be sure to use the supplied screws for the
Supplied installation.
screws
PVM-2030/2130QM/2950Q/2950QM and PGM-200R1A/
200R1E/200R1U.
17
3-859-708-01(1)