Installation - Sony SCA-S30 Operating Instructions Manual

Active speaker
Hide thumbs Also See for SCA-S30:
Table of Contents

Advertisement

Installation

WARNING
• Contact a qualified technician when installing the unit on a ceiling or high location.
• When installing the unit in a high location, make sure that the location can support the
weight of the unit and parts for installation, and make sure the unit is secured. Failure
to do so may result in injuries.
• Always attach the supplied safety wire rope to prevent the unit from falling.
• When the unit is installed in a high location, inspect the installation once a year and
check for loose fixtures. Increase the frequency of inspection depending on the
installation location.
This display conforms to international dust and splash proof standard IEC60529 IP66 and so
can be used in a location where a lot of dust particles or splashing water may be produced.
The performance indicated by the digits after IP is shown below.
Dust proof
IP6_ Protected against dust.
Definition
Entry of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere
with the safe and proper operation of the equipment.
Splash proof
IP_6 Protected against splashing water.
Definition
Water splashing against the enclosure from any direction shall have no harmful effect.
Caution
Upside-down installation of the speaker is not recommended, as this may reduce the
waterproof properties (IP66 standard) of the speaker.
9
Installation
GB

Advertisement

Table of Contents
loading

Table of Contents