Advertisement
Quick Links
SERVICE MANUAL
Ver. 1.3 2014.07
SS-SHAKE33/SHAKE44
• SS-SHAKE33 is front speakers in SHAKE-33.
• SS-SHAKE55 is front speakers in SHAKE-55.
• SS-SHAKE77 is front speakers in SHAKE-77.
• SS-SHAKE44 is front speakers in SHAKE-44D.
• SS-SHAKE66 is front speakers in SHAKE-66D.
• SS-SHAKE88 is front speakers in SHAKE-88D.
• SS-SHAKE33P is the package speaker of front speakers in SHAKE-33.
• SS-SHAKE55P is the package speaker of front speakers in SHAKE-55.
• SS-SHAKE77P is the package speaker of front speakers in SHAKE-77.
• SS-SHAKE88P is the package speaker of front speakers in SHAKE-88.
Speakers
SS-SHAKE88 for SHAKE-88D
Speaker system
4-way, Sound Pressure Horn and Bass
Refl ex
Speaker unit
Woofers: 200 mm, cone type
Tweeters: 25 mm, horn type
Mid speakers: 100 mm, cone type
Subwoofers: 380 mm, cone type
Rated impedance
Woofers/mid speakers/tweeters:
4 ohms
Subwoofers: 8 ohms
Dimensions (w/h/d) (Approx.)
510 mm × 783 mm × 450 mm
Mass (Approx.)
35.0 kg
Quantity: 2 pieces
SS-SHAKE66 for SHAKE-66D
Speaker system
3-way, Sound Pressure Horn and Bass
Refl ex
Speaker unit
Woofers: 200 mm, cone type
Tweeters: 25 mm, horn type
Subwoofers: 350 mm, cone type
Rated impedance
Woofers/tweeters: 4 ohms
Subwoofers: 10 ohms
Dimensions (w/h/d) (Approx.)
490 mm × 660 mm × 363 mm
Mass (Approx.)
26.0 kg
Quantity: 2 pieces
9-890-649-04
Sony Corporation
2014G80-1
©
2014.07
Published by Sony EMCS (Malaysia) PG Tec
SS-SHAKE33P/SHAKE55P/SHAKE77P/SHAKE88P
SS-SHAKE55/SHAKE66
SS-SHAKE77/SHAKE88
SPECIFICATIONS
SS-SHAKE44 for SHAKE-44D
Speaker system
3-way, Sound Pressure Horn
Speaker unit
Woofers: 300 mm, cone type
Tweeters: 25 mm, horn type
Mid speakers: 100 mm, cone type
Rated impedance
Mid speakers/tweeters: 5 ohms
Woofers: 4 ohms
Dimensions (w/h/d) (Approx.)
410 mm × 610 mm × 376 mm
Mass (Approx.)
18.5 kg
Quantity: 2 pieces
SS-SHAKE77 for SHAKE-77
Speaker system
4-way, Sound Pressure Horn and Bass
Refl ex
Speaker unit
7
Woofers: 200 mm (7
/
in), cone type
8
Tweeters: 25 mm (1 in), horn type
Mid speakers: 100 mm (4 in), cone
type
Subwoofers: 380 mm (15 in), cone
type
Rated impedance
Woofers/mid speakers/tweeters:
4 ohms
Subwoofers: 8 ohms
Dimensions (w/h/d) (Approx.)
510 mm × 783 mm × 450 mm
(20
1
/
in × 30
7
/
in × 17
3
/
in)
8
8
4
Mass (Approx.)
35.0 kg (77 lb 3 oz)
Quantity: 2 pieces
SS-SHAKE33/SHAKE44/SHAKE55/
SHAKE66/SHAKE77/SHAKE88
SS-SHAKE33/SHAKE44D/SHAKE55/
SHAKE66D/SHAKE77/SHAKE88D
SS-SHAKE33/SHAKE55/SHAKE77
SS-SHAKE44D/SHAKE66D/SHAKE88D
Saudi Arabia Model
South African Model
SS-SHAKE55 for SHAKE-55
Speaker system
3-way, Sound Pressure Horn and Bass
Refl ex
Speaker unit
Woofers: 200 mm (7
7
/
in), cone type
8
Tweeters: 25 mm (1 in), horn type
Subwoofers: 350 mm (14 in), cone
type
Rated impedance
Woofers/tweeters: 4 ohms
Subwoofers: 10 ohms
Dimensions (w/h/d) (Approx.)
490 mm × 660 mm × 363 mm
3
3
(19
/
in × 26 in × 14
/
in)
8
8
Mass (Approx.)
26.0 kg (57 lb 6 oz)
Quantity: 2 pieces
• JIG
When disassembling the set, use the following jig (for front panel
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
SPEAKER SYSTEM
US Model
SS-SHAKE33/SHAKE55
AEP Model
UK Model
SS-SHAKE33
Russian Model
SS-SHAKE66D
E Model
Argentina Model
Mexican Model
Australian Model
SS-SHAKE77
Malaysia Model
Thai Model
SS-SHAKE44D/SHAKE88D
SS-SHAKE33 for SHAKE-33
Speaker system
3-way, Sound Pressure Horn
Speaker unit
Woofers: 300 mm (12 in), cone type
Tweeters: 25 mm (1 in), horn type
Mid speakers: 100 mm (4 in), cone type
Rated impedance
Mid speakers/tweeters: 5 ohms
Woofers: 4 ohms
Dimensions (w/h/d) (Approx.)
410 mm × 610 mm × 376 mm
(16
1
/
in × 24
1
/
in × 14
7
/
in)
4
8
8
Mass (Approx.)
18.5 kg (40 lb 13 oz)
Quantity: 2 pieces
Design and specifi cations are subject to
change without notice.
Advertisement
Related Manuals for Sony SS-SHAKE33
Summary of Contents for Sony SS-SHAKE33
- Page 1 SS-SHAKE33/SHAKE44 SS-SHAKE55/SHAKE66 SS-SHAKE77/SHAKE88 Australian Model SS-SHAKE77 Malaysia Model • SS-SHAKE33 is front speakers in SHAKE-33. • SS-SHAKE55 is front speakers in SHAKE-55. SS-SHAKE44D/SHAKE66D/SHAKE88D • SS-SHAKE77 is front speakers in SHAKE-77. Saudi Arabia Model • SS-SHAKE44 is front speakers in SHAKE-44D.
-
Page 2: Section 1 Diagrams
SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 SECTION 1 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards. For Schematic Diagrams. Note: Note: • X : Parts extracted from the component side. - Page 3 SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 1-3. PRINTED WIRING BOARDS – SPK LED (SHAKE77/SHAKE88) AND SPLITTER Board (SHAKE77/SHAKE88) – • : Uses unleaded solder. SPK LED BOARD SPK LED BOARD (SHAKE77/SHAKE88) (SHAKE77/SHAKE88) (COMPONENT SIDE) (CONDUCTOR SIDE) D1800 D1800 JL1808 JL1811 JL1809 JL1810 JL1812...
- Page 4 SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 1-4. SCHEMATIC DIAGRAM – SPK LED (SHAKE77/SHAKE88) AND SPLITTER Board (SHAKE77/SHAKE88) – SPLITTER BOARD SPK LED BOARD SHAKE77/SHAKE88 SHAKE77/SHAKE88 JL1807 JL1804 GREEN GREEN GREEN JL1806 JL1808 BLUE BLUE BLUE SPEAKER JL1809 JL1805 JL1810 RED-LED RED_LED RGB +13V...
-
Page 5: Section 2 Exploded Views
: Mexican model : Malaysia model : Russian model : South African model : Thai model 2-1. SS-SHAKE33/SHAKE44 not supplied (SPK LED board) not supplied Note: This diagram is for L channel speaker. The mechanical position of R channel is reversed. - Page 6 SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 2-2. SS-SHAKE55/SHAKE66 dust cap of loudspeaker not supplied supplied not supplied not supplied not supplied dust cap of loudspeaker not supplied not supplied not supplied (SPK LED board) Note: This diagram is for R channel speaker. The mechanical position of L channel is reversed.
- Page 7 SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.3 2-3. SS-SHAKE77/SHAKE88 not supplied not supplied dust cap of loudspeaker dust cap of loudspeaker not supplied not supplied not supplied not supplied not supplied not supplied not supplied (SPK LED board) not supplied dust cap of loudspeaker...
-
Page 8: Section 3 Electrical Parts List
SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.2 SECTION 3 SPK LED SPLITTER ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS The components identified by mark 0 the parts list may be different from the uF: μF or dotted line with mark 0 are critical for parts specified in the diagrams or the •... - Page 9 SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 Ver. 1.1 MEMO...
-
Page 10: Revision History
SS-SHAKE33/SHAKE44/SHAKE55/SHAKE66/SHAKE77/SHAKE88 REVISION HISTORY Ver. Date Description of Revision 2014.01 2014.04 Addition of SS-SHAKE44, SS-SHAKE55, SS-SHAKE66 and SS-SHAKE88 model. Add illustration of ABSORBENT, ACOUSTIC and CUSHION C in page 6. Change P/N of Ref. No. 51 in page 6. 2014.05 Addition of Argentina model (SHAKE-33/55/77).