12
en | Connections
3.2
Connecting the cables
Connecting the AMC2 power cable (F)
1.
2.
3.
4.
Mounting and connecting the power cable with LED indicator
(I)
1.
2.
3.
4.
5.
6.
7.
2022-02 | V06 | F.01U.330.017
Connect the 7-pin plug to the AMC2 connector labeled
POWER.
Connect the 4-pin plug to the power supply connector
labeled OK.
Connect the 2-pin plug to the power supply connector
labeled DC.
Connect the grounding cable to the AMC2 grounding point.
Pass the cable end through the front of the LED bracket
hole (Figure 1, position 13).
Carefully pull the cable through the back of the LED
bracket.
Make sure that the LED reaches and fits the LED bracket
hole.
Connect the single brown wire to position 3, marked with L
(Figure 3.2).
Connect the other end from the brown wire to position 1
(Figure 3.2).
Connect the single blue wire to the position 4, marked with
N (Figure 3.2).
Connect the other end from the blue wire to the position 2
(Figure 3.2).
AMC2 enclosure with 2 DIN rails
Bosch Security Systems B.V.