Bosch AMC2 Installation Manual page 11

AMC2 enclosure with 2 DIN rails
1.
2.
Warning!
Risk of electric shock!
!
Disconnect the mains supply voltage before you work on the
devices inside the enclosure.
Installing the components
1.
2.
3.
Bosch Security Systems B.V.
Insert the cables of the device through the knock-outs at
the top-right side wall of the enclosure, or through the rear
of the enclosure.
Provide an appropriate disconnect device to the supply
line.
Mount the Access Modular Controller (AMC2) on the right-
hand side of the mounting rail.
Mount the power supply unit on the left-hand side of the
mounting rail.
If you are using rechargeable batteries, install the batteries
at the bottom of the enclosure and secure them with a
fixing bracket.
Connections | en
2022-02 | V06 | F.01U.330.017
11