Basic Operations - Hitachi CP-S840W/E Operating Manual

Basic operations

To project the picture
4
3
5
1 Turn the MAIN POWER switch of the projector on.[ I : ON]
· The ON indicator will light up orange.
2 Press the STANDBY/ON button.
· The ON indicator blinks (green) during warm-up and then lights (green).
· Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
power is turned off, since the lamp has cooled preparing for next lighting.
3 Remove the lens cap.
4 Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6 Power on all connected equipment.
The method of connecting various equipment, see on the page 20~28.
7 Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal to be projected
on the screen.
· The selected signal input is displayed at the bottom right of the screen
for 3 seconds.
2
STANDBY/ON
RESET
1
STANDBY/ON
2
FREEZE
OFF
INPUT
MUTE
POSITION ON
7
MENU
RESET
MENU ON
7
BLANK
RGB
Example on-screen display
MUTE
VOLUME
MAGNIFY
LASER
RIGHT
MOUSE ON
TIMER
VIDEO
INPUT
RGB1
13