Input Selection; Volume Adjustment - Hitachi CMP307XU User Manual

OPERATING INSTRUCTIONS (continued)

Input Selection

Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the
sequence of RGB1
The kinds of input for which SKIP has been
selected with the on-screen display system,
EasyMenu ( ), are skipped.
21

Volume Adjustment

While the on-screen display system, EasyMenu (
controller VOLUME button
the sound volume.
The adjustment status will be displayed as guidance
while you press these buttons.
While the guidance is on display, press
turn up the volume.
While the guidance is on display, press
turn down the volume.
You can also adjust the sound volume setting via the
on-screen display system, EasyMenu
The sound volume adjustment mode will exit when no
keys are entered for 5 seconds. (The adjustment
status guidance will disappear automatically.)
14
RGB2 VIDEO1 VIDEO2
or (or the unit VOLUME button
or
or
16
RGB1.
Remote
RGB1
controller
RGB/
VIDEO
RGB2
VIDEO1 (composite or S input)
Set unit
RGB/VIDEO
VIDEO2
) is not on display, press the remote
16
Remote
controller
to
VOLUME
to
Set unit
[ VOLUME ]
Adjustment status guidance
(D-sub input)
(BNC input)
(COMPONENT input)
or to adjust
Sound volume setting
VOLUME : 30