Table of Contents
Advertisement
Displays the current system voltages.
Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
setting. (Default: Auto)
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal
Allows the fan to run at different speeds according to the temperature. You can adjust
the fan speed with System Information Viewer based on your system requirements.
(Default)
Silent
Allows the fan to run at slow speeds.
Manual
Allows you to control the fan speed in the curve graph.
Full Speed
Allows the fan to run at full speeds.
Allows you to select the reference temperature for fan speed control.
Temperature Interval
Allows you to select the temperature interval for fan speed change.
Auto
Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage
Voltage mode is recommended for a 3-pin fan.
PWM
PWM mode is recommended for a 4-pin fan.
Enables or disables the fan stop function. You can set the temperature limit using the temperature curve.
The fan stops operation when the temperature is lower than the limit. (Default: Disabled)
Temperature
Displays the current temperature of the selected target area.
Displays current fan speeds.
Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit
warning sound. Options are: Disabled (default), 60
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connection when this occurs. (Default: Disabled)
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
- 26 -
o
F, 90
o
C/194
o
F.
Hide quick links:
Advertisement
Table of Contents
