Gigabyte Z370 HD3P User Manual page 11

HDMI Port
The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master
output. You can use this port to connect your HDMI-supported monitor. The maximum supported
being used.
After installing the HDMI device, make sure to set the default sound playback device to HDMI.
(The item name may differ depending on your operating system.)
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Connection/
Connection/Speed LED:
Speed LED Activity LED
State
Orange
Green
Off
LAN Port
Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended
that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).
Use this audio jack for a headphone or 2-channel speaker. This jack can be used to connect front speakers
Mic In (Pink)
The Mic in jack.
HD Audio Manager application.
Please visit GIGABYTE's website for more audio software information.
device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
Activity LED:
Description
State
1 Gbps data rate
Blinking
100 Mbps data rate
On
10 Mbps data rate
- 11 -
Description
Data transmission or receiving is occurring
No data transmission or receiving is occurring