Dirt Container & Filter: Removal & Replacement - Vax ASTRATA POWER VZL-401 Instruction Manual

Vax VXL 401 User Guide.qxd:VZL-401 User Guide
www.vax.co.uk
5. Dirt container & filter:
removal & replacement
WARNING: to reduce risk of injury from moving
!
parts - unplug before servicing.
Press dirt container release button and remove dirt
container from cleaner (Fig.5/1).
Fig.5/1
Hold dirt container inside rubbish bin (Fig.5/2) and press
bin release empty button to empty (Fig.5/2). Tap the dirt
container on the inside of rubbish bin to remove excess
dust.
Remove central dust chamber
Fig.5/2
Twist and remove the central dust chamber bung over
a bin (Fig.5/3).
Fig.5/3
6
dirt container and filter
All manuals and user guides at all-guides.com
13/6/07 18:01 Page 6
Replace central dust chamber
Replace central dust chamber bung and twist to secure
(Fig.5/4) .
Fig.5/4
Wipe inside of dust container and shroud with a damp
cloth to remove excess dust.
Remove foam filter
Press tab on bottom of foam filter cover and pull to remove
(Fig.5/5).
Fig.5/5
Clean foam filter
Fig.5/6
Separate the filter assembly by removing the foam filter
from its plastic housing. Tap the foam filter on the inside
of a rubbish bin to remove excess dust and dirt from filter.
Wash foam filter
Hold foam filter under running water to wash. Ring
excess water out of filter. Allow filter to dry for at least
24 hours before replacing in filter cartridge (Fig.5/7)..