Dirt Container & Filter: Removal & Replacement - Vax Mach1 VZL-6011 Instruction Manual

Table of Contents

Advertisement

Vax VZL-6011 User Guide.qxd:VZL-6011 User Guide
www.vax.co.uk
5. Dirt container & filter:
removal & replacement
WARNING: to reduce risk of injury from moving
!
parts - unplug before servicing.
Press dirt container release button and remove dirt
container from cleaner.
Fig.5/1
Hold dirt container inside rubbish bin (Fig.5/2) and press
bin release empty button to empty (Fig.5/2). Tap the dirt
container on the inside of rubbish bin to remove excess
dust.
Fig.5/2
6
dirt container and filter
Remove foam filter
Press tab on bottom of foam filter cover and pull to remove.
Clean foam filter
Separate the filter assembly by removing the foam filter
from its plastic housing. Tap the foam filter on the inside
of a rubbish bin to remove excess dust and dirt from filter.
Wash foam filter
Hold foam filter under
running water to wash. Ring
excess water out of filter.
Allow filter to dry for at
least 24 hours before
replacing in filter cartridge.
Replace foam filter
Return foam filter to cleaner and snap into place. Replace
foam filter cover and snap into place to secure (Fig.5/6).
Get other manuals https://www.bkmanuals.com
17/9/08
11:03
Fig.5/3
Fig.5/4
Fig.5/6
Page 6
Fig.5/5
Fig.5

Advertisement

Table of Contents
loading

Table of Contents