Sharp BP-FR12U Operation Manual page 35

Using the document control function in document filing
mode
After a file has been stored by document filing using the settings
configured in "Document Control Setting", follow the steps below to print a
document control pattern. (For information on using files stored by
document filing, see the User's Manual (PC).)
Document Control Print Select
When [Allow User to Select] is selected, the [Document Control] key can
be tapped to select whether or not a document control pattern is printed.
However, if the [Always Add the Pattern if You Print with it at Stored]
checkbox is selected (
canceled regardless of whether [Allow User to Select] is selected or not.
1
Tap the [Others>>] key in the print settings screen, and tap
the [Document Control] key.
If "Not Printing" is selected in "Document Control Print Select" in the
document control settings, the [Document Control] key is grayed out to
prevent selection. (However, for files that had document control patterns
printed when the files were saved, the [Document Control] key can be
tapped if the [Always Add the Pattern if You Print with it at Stored]
checkbox has been selected (
2
Tap the [Print Now] key.
To save the data after printing, set the [Delete] checkbox to
the [Print Now] key.
To delete the data after printing, set the [Delete] checkbox to
tap the [Print Now] key.
), document control pattern printing cannot be
) in the document control settings.)
33
Document Control Setting
and tap
and