Specifications; Instructions For Putting Into Use - Chicago Electric Chicago 94560 Set Up And Operating Instructions Manual

speCiFiCatiOns

Electrical Input 120V~ / 60Hz / 5A
800 ~ 3,000 SPM
Speed
6 Position, Variable Speed
Cutting Modes 4 Position, Straight Cutting & Orbital
3-3/8" (Wood Stock)
Capacity
1/4" (Ferrous Stock)
Blade Chuck Spring Loaded, Quick Change
Type T-Shank
Shoe Plate 0° ~ 45° Left & Right Tilt (In 15°
Angles Increments)
Dust Chute
1-1/2" O.D.
Diameter
2x 10 TPI Wood Cutting Blades
Accessories 24 TPI Metal Cutting Blade
Rip Guide
DANGER
laser light
aVOid direCt eYe eXpOsure
Max. Output: 2.5 mw,
wavelength: 650 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
CEN-TECH
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011
Manufacture Date: ___________, _______
aVOid eXpOsure
laser light is
eMitted FrOM this
aperture
unpaCKing
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
reV 10h
SKU 94560
e194601
For technical questions, please call 1‑800‑444‑3353.
instruCtiOns FOr putting
intO use
read the entire iMpOrtant
saFetY inFOrMatiOn
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
FrOM aCCidental
OperatiOn:
turn the power switch of the tool
off and unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
tO preVent
seriOus inJurY
Page 8