China Post Code - Hand Held Products 2020/5620 System Manual

Identifier will be reported as "]C1". If RSS Emulation is selected, the AIM
Symbology Identifier will be reported as "]e0." Any application that accepts
EAN•UCC data can be simplified since it only needs to recognize one data carrier
type. Default = EAN•UCC Emulation Off .
RSS Emulation
128 Emulation
* EAN•UCC Emulation Off

China Post Code

<Default All China Post Code Settings>
China Post Code
On
* Off
China Post Message Length
Scan the bar codes below to change the message length. Refer to Message
Length on page 6-2 for additional information. Minimum and Maximum
lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length
Maximum Message Length
IMAGETEAM™ 2020/5620 System Manual 6 - 31