KTM 450 XC ATV 2008 Setup Instructions page 3

INTRODUCTION
The work described in the setup instructions must be performed before delivery to the customer.
INTRODUCTION
Read the setup instructions before starting work.
Print the current PDI form from KTM DEALER.NET.
These setup instructions corresponded to the latest state of this series at the time of printing. However; we reserve the right to make
changes resulting from continuing development and design without correcting these setup instructions.
No description of general workshop procedures is provided. Safety regulations common in everyday workshop procedures are also not
mentioned. It is assumed that the work will be undertaken by a fully trained mechanic.
All specifications are not binding. KTM Sportmotorcycle AG in particular reserves the right to modify or delete technical specifica-
tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt
these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery
options, deviations from illustrations and descriptions, as well as printing and other errors. The models portrayed partly contain special
equipment that does not belong to the regular scope of delivery.
© 2007 by KTM-Sportmotorcycle AG, Mattighofen Austria
All rights reserved
Reproduction, even in part, is permitted only with the express written permission of the copyright owner.
ISO 9001(12 100 6061)
Within the meaning of the international quality management standard ISO 9001, KTM uses quality assurance processes
that lead to the maximum possible quality of the products.
Issued by: TÜV Management Service
KTM-Sportmotorcycle AG
5230 Mattighofen, Austria
1