Standards And Directives Complied With - Siemens FDM1101-Rx Technical Manual

2.3

Standards and directives complied with

Building Technologies
Fire Safety & Security Products
Disregard of the safety regulations
Before they are delivered, Siemens products are tested to ensure they function
correctly when used properly. Siemens disclaims all liability for injury or damage
caused by misuse or the disregard of the instructions or danger warnings contained
in the documentation. This applies in particular to:
Personal injuries or damage to property caused by improper use and incorrect
application
Personal injuries or damage to property caused by disregarding safety
instructions in the documentation or on the product
Personal injuries or damage to property caused by poor maintenance or lack of
maintenance
Exclusion of liability
We have checked the content of this document for compliance with the described
hardware and software. Nevertheless, deviations cannot be excluded, therefore we
do not offer any guarantee for complete compliance. The information in this
document is regularly checked and necessary corrections are included in
subsequent editions.
We are grateful for suggestions for improvements.
A list of the standards and directives complied with is available from your Siemens
contact.
Safety
11
A6V10201150_a_en_--
05.06.2008