Table of Contents
Advertisement
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 ECC UDIMMs on this motherboard.
Follow these instructions to install a UDIMM module:
1.
Insert the UDIMM memory module vertically into the UDIMM slot and push it down.
2.
Close the plastic clip at both edges of the UDIMM slots to lock the UDIMM module.
Note:
For dual-channel operation, UDIMMs must be installed in matched pairs.
3.
Reverse the installation steps when you want to remove the UDIMM module.
Note: DIMM must be populated in sequential alphabetic order, starting with bank A0.
2
Memory Type
Voltage (V)
Connector
Speed (MT/s)
ECC
Channels
DIMM Per Channel
DIMM Capacity (GB)
Hardware Installation
1
DDR4
1.2V
UDIMM
3200
Supported
2
1,2
4,8,16,32
- 13 -
2
Advertisement
Table of Contents
